Industrial
NB220
The largest six-axis arm in the range at 220 kg. The NB220R is a down-reaching build for die casting and injection molding, where the robot works below its own base.
Check this figure
ROKAE's datasheet and consolidated catalog disagree on mass: the datasheet gives 1,138–1,165 kg, the catalog 1,445–1,488 kg. Confirm the figure with us before designing a base or specifying a lift.
Applications
- Palletizing
- Heavy handling
- Packing
- Machine tending
Typical industries
Photovoltaic · Automotive parts · Logistics · Food and beverage
Specifications
| Payload | 150–220 kg |
|---|---|
| Reach | 2,705–3,201 mm |
| Repeatability | ±0.07–0.08 mm |
| Axes | 6 |
| Protection | IP65 body, IP67 wrist |
| Mass | 1,138–1,165 kg |
Variants
Model codes read NB<class>–<payload>/<reach in meters>. A dash in the reach column means only the nominal metre class is documented; ask us for the exact figure rather than reading it off the code.
| Designation | Payload | Reach |
|---|---|---|
| NB220-220/2.7 | 220 kg | 2,705 mm |
| NB220-170/2.7 | 170 kg | 2,705 mm |
| NB220-150/3.2 | 150 kg | 3,201 mm |
| NB220R-150/3.2Down-reaching | 150 kg | 3,201 mm |
Request a quotation
We quote in writing and do not publish prices. Tell us the application and we will come back with a configuration and a number.
Request a quoteFigures are ROKAE’s published specifications at nominal conditions. Achievable payload, reach and cycle time in a given cell depend on tooling, mounting, duty cycle and program. Confirm against the current datasheet and an application review before committing a design.